ION Audio Air Lp Guide D'utilisation Rapide page 5

Using Air LP Speaker with Other Bluetooth Devices
1. Power on your Bluetooth device (smartphone, tablet, etc.).
2. Power on the Air LP Speaker by pressing and releasing the Power/Volume knob.
3. The Power/Volume knob LED ring will be solid red showing it is powered on and in pairing
mode.
4. Go to your device's Bluetooth settings, find Air LP Speaker, and connect.
5. Once your device is connected to the Air LP Speaker, the Bluetooth LED ring on the Air LP
Speaker will be solid blue.
6. Play music on your Bluetooth device.
7. Adjust the volume knob on the Air LP Speaker by rotating the knob.
8. To disconnect pairing, press and hold the Volume knob on Air LP Speaker for two seconds.
The LED ring will return to red. Alternately, you can turn off Bluetooth on your Bluetooth
device or select "Disconnect" from your Bluetooth device's settings menu.
9. To connect to another Bluetooth device, repeat steps to pair.
Using Air LP With Your Computer
Recording
To record music to your computer, you can use ION EZ Vinyl/Tape Converter and a USB cable.
EZ Vinyl/Tape Converter conveniently saves your recordings to your computer. After you finish
converting your vinyl, you can then burn to CD or load onto portable media devices.
To install the software, insert the included CD into your computer, and follow the on-screen
instructions.
1. With EZ Vinyl/Tape Converter installed on your computer, use the included USB cable to
connect Air LP's USB port to an available USB port on your computer.
2. On your computer, you can open EZ Vinyl/Tape Converter by going to Start Menu  All
Programs (Windows) or the Applications menu (Mac).
3. Follow the on-screen instructions to set up your recording. When prompted to play your
music, move Air LP's tonearm over the record to start playback.
Note: To listen to a record while it's playing, listen through your computer's speakers, or
connect Air LP's RCA outputs to a stereo system or powered speakers. Do not connect
them to phono-level inputs; Air LP's RCA outputs are line-level and could damage a device
with phono-level inputs.
4. When you have finished recording, raise Air LP's tonearm from the record and return it to its
arm clip.
Visit ionaudio.com/computer-optimization for more information on optimizing your computer
for audio.
Playback
You can listen to the music on your computer through its internal speakers or through
headphones connected to it. (Air LP cannot be used as a playback device for your computer's
audio.)
To listen to a record while it's playing, listen through your computer's speakers, or connect Air
LP's RCA outputs to a stereo system or powered speakers. Do not connect them to phono-
level inputs; Air LP's RCA outputs are line-level and could damage a device with phono-level
inputs.
5