gourmetmaxx 02553 Mode D'emploi page 18

EN
Assembly
1. Place the motor unit (4)
on a dry, even and fi rm
surface.
4. Place the stainless
steel sieve onto the
motor shaft (in the
motor unit). Make sure
that you hear and feel
it engage and that it fi ts
securely.
The device cannot be switched on if the lid has not been fi xed with the locking
clips.
Juicing
1. Place a suitable vessel under the juice outlet (2).
18
2. Place the separating
container (1) with the
juice outlet (2) and the
pomace outlet (7) on
the motor unit. Place
on the juice outlet if
necessary.
5. Place on the lid (8) with
the feed chute (9).
6. Press the lid down
fi rmly and fi x it to the
device with the locking
clips (3).
2. Switch on the device using the dial (5):
– 1 (normal speed)
– 2 (fast speed)
– P (pulse function)
To use the pulse function, the dial must be held in the
P position. When the dial is released, it automatically
returns to the 0 position and the device stops.
3. Tilt the pomace jug (6)
slightly and place it un-
der the pomace outlet.
Make sure that it is po-
sitioned straight under
the pomace outlet.
7. Connect the device
to a properly installed
plug socket.
The device is now ready for
use.