Gembird WNP-RP-003 Guide D'utilisation Rapide page 3

English:
Setup WiFi-Repeater in Repeater mode
This manual describes the steps you have to follow to setup your Gembird
WNP-RP-003 WiFi-repeater.
There are two ways to connect the repeater to your home router:
A: Via WPS (Wifi Protected Setup)
B: Manual setup (go to
A: Connecting the repeater via WPS
Press the WPS button on your router (most routers have this feature, check
your router manual for more information). On most routers a WPS indicator light will
blink when WPS is activated.
Now also press the WPS button on your repeater within one minute.
Your repeater will now automatically connect to your router. During this process
the indicator lights on the repeater will blink frequently.
When the setup is complete and your repeater is ready for use, it will send out
the following network name (SSID): yourroutername.Ext
The password for this wireless network will be identical to the password of your
router.
GEMBIRD EUROPE B.V.
All brands and logos are registered trademarks of their respective owners
www.gembird.nl for detail instruction manual and video)
WIFI REPEATER, 300 MBPS
http://www.gembird.eu
WNP-RP-003
3