Symbols On The Product; Product Liability - Husqvarna 350BT Manuel D'utilisation

5. Air intake screen
6. Fan
7. Air filter
8. Starter rope handle
9. Fuel tank
10. Waist belt
11. Spark plug
12. Vibration damping system
13. Choke control
14. Control handle
15. Start/stop switch with throttle control (350BT)/Stop
switch (350BF)
16. Throttle trigger
17. Throttle lever (350BF)
18. Pipe angle
19. Clamp
20. Flexible hose
21. Control pipe
22. Cable clamp
23. Intermediate pipe
24. Blower nozzle
25. Operator's manual
26. Combination wrench
27. Air purge bulb
28. Idle speed screw

Symbols on the product

WARNING! This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
Read the operator's manual carefully and
make sure that you understand the
instructions before use.
Use approved hearing protection and
approved eye protection. If the environment
contains dust, use a breathing mask.
Use approved protective gloves.
Mixture of gasoline and two-stroke oil.
Air purge bulb.
1246 - 001 - 14.02.2020
Keep all body parts away from hot surfaces.
Choke, open position.
Choke, closed position.
yyyywwxxxxx
Note: Other symbols/decals on the product refer to
certification requirements for other commercial areas.
EPA III
The Emissions Compliance Period referred to on the
Emission Compliance label indicates the number of
operating hours for which the engine has been shown to
meet Federal emissions requirement. Maintenance,
replacement or repair of the emission control devices
and system may be performed by any non-road engine
repair establishment or individual.

Product liability

As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
Look out for thrown objects.
Thrown objects can cause
serious injury. Use personal
protective equipment.
Keep a safety distance at a
minimum of 15 m to persons
or animals.
The rating plate shows the
serial number. yyyy is the
production year and ww is
the production week.
3