Caframo MediHeat 9210 Mode D'emploi page 5

Table des Matières

Publicité

Operating Instructions
Troubleshooting
Problem
Possible Cause
Unit is not plugged in.
Temperature may be set too
low.
Resettable fuse has
Heater will not
activated.
turn on.
Unit is damaged or in need
of repair.
The outlet is worn or
damaged.
Thermostat Switch
This control automatically cycles ON/OFF to regulate and maintain
desired ambient temperature. Turn knob clockwise towards
increase, and counterclockwise towards
temperature.
Heat Selector Switch
HI HEAT (1500W)
LOW HEAT (900W)
FAN ONLY
OFF (No power to fan or element.)
Light
(Illuminated when power is on.)
NOTE: If the light is on but the heater is not working, turn the thermostat
in a clockwise direction.
Solution
Plug power cord into electrical outlet.
Adjust the thermostat until heater restarts.
Turn the heater off, unplug and let cool for 10 minutes
before restarting. Refer to "Safety Feature" in manual.
Cease usage and unplug. Contact Customer Service for
assistance: 1-800-567-3556 / contactus@caframo.com
Try another outlet.
– 3 –
to
to decrease the

Publicité

Table des Matières
loading

Table des Matières