Instructions For Use - Weka KS30 Mode D'emploi

GB
INSTRUCTIONS FOR USE - DIAMOND DRILL RIG KS30
Please read carefully before putting the drill rig into operation!
With the WEKA drill rig, you own an outstanding quality product with which you will be very satisfied,
provided you use it properly.
1. G E N E R A L S A F E T Y P R E C A U T I O N S
WARNING! Read all safety precautions and instructions. Failures in the compliance with these
safety precautions and instructions can cause electric shock, fire and/or heavy injuries.
Please keep these safety precautions and instructions for the future.
1) Security of employment
a) Keep your working area clean and well illuminated. Disorder or unilluminated working
areas can cause accidents.
b) Keep children and other persons away from the electric tool while using it. When
being distracted, you can lose the control on the device.
2) Personal safety
a) Be attentive, pay attention to what you do and go to work with the electric tool with
reason. Do not use an electric tool when you are tired or under the influence of
drugs, alcohol or pharmaceuticals. One moment of carelessness while using an electric
tool kann cause serious injuries.
b) Wear personal protective equipment and always goggles. The wearing of personal
protective equipment, like dust mask, skid-proof shoes, protection helmet or hearing
protection, depending on the kind and use of the electric tool reduces the risk of injuries.
c) Avoid abnormal posture. Care for safe standing and keep the balance anytime. Thus
you can control the electric tool better in unexpected situations.
d) Wear suitable clothing. Do not wear wide clothing or jewelry. Keep hair, clothing
and gloves away from moving parts. Wide clothing, jewelry or long hair can be caught
by moving parts.
e) If there is the possibility to assemble a dust exhauster and collecting device, make
sure that these are connected and used correctly. The use of a dust exhauster can
reduce dangers by dust.
3) Use and handling of the device
a) Do not overload the device.
b) Maintain the device with care. Check if movable parts function correctly and do not
jam, if parts are broken or damaged in that way, that the function of the device is
affected. Have damaged parts repaired before using the device. Many accidents
originate from bad maintained devices.
c) Keep the cutting tool sharp and clean. Carefully maintained cutting tools with sharp
edges do jam less and are easier to guide.
d) Use device, accessory, operation tools, etc. according to these instructions.
Thereby consider the conditions of employment and the work to be done. The use
of devices for others than the intended task can result in dangerous situations.
4) Service
a) Have your tool only repaired by qualified personnel and only with original spare
parts. Thus it is assured that the safety of the electric tool is being obtained.
7