Quick Guide; Package Contents - FANATEC CSL DD Guide De Démarrage Rapide

1

PACKAGE CONTENTS

• 1x CSL DD Wheel Base
A
• 4x M6x8 mm Hard-Mounting T-Nut
B
• 1x USB Type-A to Type-C Cable
C
• 1x Power Supply
D
• 1x Power Cord (Regional) E
When powering up the wheel base for the first time, please update the firmware. You can obtain the latest
firmware from fanatec.com/downloads. Follow the instructions provided by the
Manual which can be found on the product page.
NOTE: A Windows PC is mandatory and PC mode must be active on the wheel base.
To turn on the wheel base, connect the system to electrical power and press the "
the wheel base for about one second. To turn off the wheel base, press and hold the "
NOTE: Only use the power supply (D) and power cord (E) included with this product. Do not touch the wheel
base shaft or attached steering wheel whilst the wheel base is performing the start-up calibration.
To cycle through modes, short press the "
„
the " button will indicate the current mode:
• Red indicates PC mode
• Green indicates Xbox mode (Xbox licensed steering wheel required)
• Yellow indicates ClubSport Wheel Base V2.5 Compatibility mode
7
Our Support Team is ready to help you! Visit
fanatec.com/support/faq
Download our app:
For detailed information, please download the user manual from
product page. This Quick Guide covers basic features and is not a replacement for the user manual.
The product warranty is provided by Endor AG. Refer to the included warranty sheet as well as the terms &
5

Quick Guide

SUPPORT
for assistance.
Fanatec.com/app
conditions of Endor AG on fanatec.com.
2C.1
4
ATTENTION
5
ON AND OFF
6
MODES
„
button whilst the wheel base is on. The LED colour illuminating
fanatec.com/downloads
2
HARD - MOUNT
M6 x (10+X) mm
3
CONNECTIONS
*
Optional
Driver & Firmware Instruction
„
button on the right side of
„
button for 3 seconds.
„
6A
" button / "
Mode LED Indicator.
8
VIDEO
Watch our CSL DD video guide:
Fanatec.com/QR/CSL-DD
or directly from the
„
and