Reya DOLPHIN PRO 24V40A Notice Technique page 18

SAFETY PRECAUTIONS
NOT-DOLPROREYA-03
4Prior to commencing connection, the mains ca-
ble gland in the packaging must be assembled
and correctly attached to the housing (using the
nut provided), in the hole designed for this purpo-
se.
4For safety reasons, the device's EARTH terminal
(PE "Protective Earth" terminal), must be connec-
ted to the system's physical earth (yellow & green
wire of the mains cable). Refer to the wiring dia-
gram for more information.
4To prevent parasite heating, ensure that the ca-
ble cross-sections are correct and the connectors
are properly tightened.
IMPORTANT : This device is not protected against
battery polarity reversals. A battery connection
error automatically causes the battery fuses to
blow as well as irreversible damage to the circuit
board.
Activation precautions.
To prevent any risk of electric shock on ac-
tivation or during operation, the protective cover
must be correctly positioned and screwed into
the housing.
This device complies with the applicable
regulations governing transmitted interference
and immunity from external disturbances (see
EMC paragraph in the Technical specifications
section).
When in operation, take particular care that
this device is not subjected to conducted or ra-
diated interference at levels higher than the legal
limits otherwise malfunctions may occur (e.g.: de-
vice too close to a powerful transmitter).
SAFETY PRECAUTIONS
NOT-DOLPROREYA-03
In other respects, this device transmits conducted
and radiated interference at levels that comply
with the applicable regulations. Ensure that other
sensitive equipment used in the vicinity is compa-
tible with this device otherwise malfunctions
may occur.
Device serial number
The serial number appears on the grey or white
sticker on one side of the device. This number is
aligned vertically and comprises a first number
indicating the year of manufacture (e.g.: 12 for
2012), a letter indicating the month of manufac-
ture (e.g.: C for the month of March), as well as
a 5-figure number that is the product's individual
serial number.
Important
Note on the choice of charge curve
It is important to note that the use of an
inappropriate charging cycle for the battery
technology may extensively impair or even
damage the latter.
This is particularly true for cycles where the
charge voltages are higher than the levels
recommended by the battery manufacturers.
Example: A serious risk of overheating the
batteries and releasing gases that are harmful to
users' health.
Curve no. 9 is compatible with a LiFeSo4
battery provided that the battery is equipped
with BMS-type battery protection (Battery
Management System) within the actual battery.
In this case, refer to the battery manufacturer's
recommendations for the choice of charging
cycle.
UK