Other Operations - AIRPULSE A200 Mode D'emploi

Bluetooth Input
Pairing
AIRPULSE A200
or
1. Turn on speaker and switch to Bluetooth mode by pressing the Bluetooth button on the
remote control or press the master volume control on back panel of the active speaker.
2. Go to setup section on your source devices (mobile phones, tablets, etc.) and search for
nearby Bluetooth devices, you will find "AIRPULSE A200" in the list.
3. Pair your device with "AIRPULSE A200".
4. Play audio tracks on your device and adjust the volume to a desired level.

Other operations

5. After pairing, using the pair record on your source device to re-connect to the speaker;
6. Bluetooth of the product will be powered off after switching away from Bluetooth mode,
so in other audio mode Bluetooth connection can not be made.
7. When switch to Bluetooth mode, the speaker will try to connect the last connected
Bluetooth source device.
8. To disconnect Bluetooth, press and hold the master volume control for about 2 seconds.
Note:
1. Bluetooth connectivity and compatibility may be different among different source
devices, depending on the software versions of source devices.
2. To enjoy the full Bluetooth functions of this product, please ensure your mobile device
supports A2DP and AVRCP profile.
3. PIN code for connection is "0000" if needed.
9
English
statement
Specifications /
Power Output: L/R Ribbon Tweeter: 10W+10W
L/R Mid-Range: 55W + 55W
Signal-Noise Ratio dB(A): ≥90dB(A)
Input Interface: AUX, Balance Input, Optical, Coaxial, Bluetooth
Input Sensitivity: Balance Input: 1300±50mV
Aux Input: 550±50mV
Bluetooth Input: 500±50mFFs
Optical Input: 350±50mFFs
Coaxial Input: 350±50mFFs
Noise Level: ≤25dB(A)
Frequency Response: 46Hz~20KHz
Tweeter: Phase Correction Horn Loaded Ribbon Tweeter
Mid-Woofer: 5.5" Aluminum Cone Neo Power Mid-Woofer
Cabinet Size (WxHxD): 203 x 355 x 295 (mm)
Net Weight: 19 Kg (42 Pounds ) / Set
NOTICE: For the need of technical improvement and system upgrade, information
contained herein may be subject to change from time to time without prior notice.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other
countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the
United States and other countries.
10
English