AIRPULSE A200 Mode D'emploi page 5

Balance and AUX Input
BAL
or
1. Press master volume control on active speaker or press the "BAL/AUX" key on the remote control
to select AUX audio source, LED indicator turns to green.
2. Connect BAL/AUX input port on active speaker to your audio source (cellphone, mp3, mp4 player
etc) using the included RCA-RCA audio cable.
3. Touch play on your device and adjust the volume to a desired level.
7
English
or
Optical and Coaxial Input
or
1. Press the master volume control on the active speaker or press the "OPT/COAX" button on the
remote control to select the optical/coaxial input.
2. Using optical or coaxial cable (optical cable included) to connect audio sources to your speaker.
3. Play from your devices and adjust the volume accordingly.
Note:
In optical and coaxial modes, only PCM signal with 44.1KHz/48KHz/96KHz/192KHz can be decoded.
or
8
English