Open Source; Logiciel Libre (Open Source); Déclaration Sur La Licence Libre - Philips 5800 Série Manuel D'utilisateur

Masquer les pouces Voir aussi pour 5800 Série:
Table des Matières

Publicité

11 Open Source

Logiciel libre (open source)

Ce téléviseur contient des logiciels libres. TP
Vision Europe B.V. propose de fournir, sur
simple demande, une copie de l'intégralité du
code source des progiciels libres protégés par
des droits d'auteur utilisés dans ce produit dès
lors que cela est requis par les licences
correspondantes.
Cette offre est valable pendant 3 ans à compter
de la date d'achat du produit pour toute
personne ayant reçu cette information.
Pour obtenir le code source, écrivez en anglais
à.
..
open.source@tpvision.com
Déclaration sur la licence libre
Remerciements et textes de licence pour le
logiciel libre utilisé dans ce téléviseur Philips.
Ce document traite de la distribution du code
source utilisé dans le téléviseur Philips, qui est
couvert soit sous la Licence publique générale
GNU (GPL), la Licence publique générale
limitée GNU (LGPL) ou toute autre licence
libre. Vous pouvez trouver les instructions pour
obtenir le code source de ce logiciel dans le
mode d'emploi.
PHILIPS NE DONNE AUCUNE GARANTIE,
EXPLICITE OU IMPLICITE, Y COMPRIS
TOUTE GARANTIE DE QUALITÉ
MARCHANDE OU D'ADAPTATION À UN
USAGE PARTICULIER, CONCERNANT
CELOGICIEL. Philips n'offre pas de support
pour ce logiciel. Ce qui précède ne porte pas
atteinte à vos garanties et vos droits prévus par
la loi en ce qui concerne tout produit Philips
que vous avez acheté. Ce s'applique seulement
au code source mis à votre disposition.
U-Boot - Universal Bootloader (2010 06)
U-Boot, a boot loader for Embedded boards
based on PowerPC, ARM, MIPS and several
other processors, which can be installed in a
boot ROM and used to initialize and test the
hardware or to download and run application
code.
Source:
http://www.denx.de/wiki/U-Boot/
udev – Userspace Device Management
Daemon (164.0) This program creates the files
for devices on a Linux system for easier
management. udev is a program which
dynamically creates and removes device nodes
from /dev/. It responds to /sbin/hotplug device
events and requires a 2.6 kernel.
Source:
https://launchpad.net/udev
Util-Linux (2.22-rc2)
Source:
https://www.kernel.org/pub/linux/utils/util-linux/
Linux Kernel (3.10)
Real-Time Operating System
Source:
http://www.kernel.org/
BusyBox (1.16.1)
BusyBox combines tiny versions of many
common UNIX utilities into a single small
executable. It provides replacements for most of
the utilities you usually find in GNU fileutils,
shellutils, etc. The utilities in BusyBox generally
have fewer options than their full-featured GNU
cousins; however, the options that are included
provide the expected functionality and behave
very much like their GNU counterparts.
BusyBox provides a fairly complete environment
for any small or embedded system.
Source:
http://busybox.net/
Ext2 Filesystems Utilities (1.41.11)
The Ext2 Filesystem Utilities (e2fsprogs) contain
all of the standard utilities for creating,
fixing,configuring, and debugging ext2
filesystems.
Source:
http://e2fsprogs.sourceforge.net/e2fsprogs-relea
se.html#1.41.12
GDB - The GNU Project Debugger (6.8)
GDB allows you to see what is going on "inside"
another program while it executes - or what
another program was doing at the moment it
crashed. GDB can do four main kinds of things
FR 23

Publicité

Table des Matières
loading

Table des Matières