Maintenance Instructions; Water Level Adjustment - Toto MS604114 Série Manuel D'installation

1) Shut off the water supply to the toilet.
2) Flush toilet and remove remaining water from tank with a sponge.
NO TE:
interfere with the trip lever operation.
NO TE: Do not overtighten. These are plastic parts. Never use pipe dope on any
water supply connection.
8)
pipe.
9) Turn water supply ON and check for leaks outside the tank.
NO TE:
Once the
Type A
For Type A and Type C Fill Valve:
Refer to the water level (WL) setting marked on
the tank. Turn the adjustment screw clockwise
in the (+) direction to increase the water level
height (see Illustration 1). Turn the adjustment
screw counter-clockwise in the (-) direction
to decrease the water level height. Flush the
toilet to verify the correct water level. Adjust as
necessary.
For Type B Fill Valve:
valve has been preset at the factory.

MAINTENANCE INSTRUCTIONS

Replacing the Fill Valve

Water Level Adjustment

Type B
drops will subside.
Type C
Water Level
Ill. 1
5
position that does not
may drip
Water
Level
valves:
Top of
Tube