Getting Started - Philips SBC RU 110 Mode D'emploi

RU240- page 2
Instructions for Use
You just made a great choice by buying this Philips universal remote
control! It takes the place of as many as four separate remote controls
and can operate the most-used functions of almost any brand of TV.
Best of all, it's quick to setup and easy to use. Here's how...
AT A GLANCE
Once you've installed the batteries, this remote is ready to work with any
Philips TV. Simply press
needs to be set up first- see Getting Started.
+P
-
P
+
-
Try it out! The easiest way to find out how your new remote works, is to
try pressing the keys and see what happens - don't worry, you won't
damage anything! Most of the keys work just like on your original remote
control. Of course, if your TV does not offer a specific function, pressing
that key will have no effect.
DON'T FORGET THE BATTERIES!

GETTING STARTED

This remote is ready to work with any Philips TV. For other brands of
equipment, it needs to be set up first. That only takes a couple of
seconds, thanks to Philips' Simple System Setup!
Before you start make sure the equipment is switched on. Sit right in
front of it.
2
y
to test. For other brands of equipment, it
LED indicates proper operation
Power switches TV on and off
Mute switches TV sound on and off / 5
Channel Up changes to next channel / 1
Channel Down changes to previous channel / 2
Volume Up controls TV volume / 3
Volume Down controls TV volume/ 4
You'll need two 1.5V batteries, type R03,
UM4 or AAA only. Put them in like this.
Remember to replace the batteries at least
once a year. Don't leave the batteries out
for longer than one hour, otherwise you will
need to set the remote up again.
English