Battery Charger - Icom IC-SAT100 Notice De Base

Masquer les pouces Voir aussi pour IC-SAT100:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

2
BATTERY CHARGING

■ Battery charger

NOTE:
• Before attaching or detaching a battery
pack, BE SURE to turn OFF the transceiver
by rotating [VOL] fully counter clockwise
until it makes a "click" sound. Otherwise, a
transceiver malfunction could occur.
• BE SURE to remove the transceiver from
the charger while operating the transceiver.
D Supplied battery charger
Charging time:
Approximately 3.1 hours for the BP-300
Turn OFF
Charging indicator
Lights orange: Charging
Lights green: Charged
Blinks red:
When a charging error has
occurred.
* May not be supplied, or the shape may be
different, depending on the transceiver version.
NOTE: If the charging indicator alternately
blinks green and orange, remove the battery
pack or the transceiver from the charger,
then reinsert it. If the charging indicator
alternately still blinks green and orange, ask
your dealer for details.
9
Power
adapter*
Battery
pack
Battery
charger
D Extend Battery Life function
The charger has the Extend Battery Life
function switch on the bottom panel.
• OFF: The battery is fully charged. The
operating time of the transceiver is
maximum.
• ON: The battery is not fully charged to not
shorten the battery life cycle.
L The battery life cycle is extended.
But the operating time of the
transceiver becomes shorter.
D Micro USB Connector
You can also use the Micro USB Connector to
charge instead of the supplied battery charger.
L "
" is displayed while charging.
L Charging time may longer than using a
battery charger.

Publicité

Table des Matières
loading

Table des Matières