Movable Closure Guards Safety; Identification Plate; Transforming Dx Version (Outlet Pipes Fi Tted On The Right) Into Sx Version (Outlet Pipes Fi Tted On The Left) - TECNOPLUS Sistem-Air TECNO PRIME 150 Manuel Technique

Instruction manual TECNO line
ByTecnoplus
s.r.l.
CENTRAL VACUUM SYSTEMS
tion motor compartment. This protection grid cannot be accessed by the operator. The operator also does
not have access to the electrically-operated parts of the appliance which are protected by a cover which
can only be removed by unscrewing the Torsen screws used to fi x the soundproofi ng dome of the housing
where the suction motors are assembled.
Every intervention on the control board and on the motors must be carried out by qualifi ed personnel only
after disconnecting the electrical power supply and by removing the electric plug from the electric socket.

4.6 Movable closure guards safety

There are no movable closure guards assembled on the appliance. Every guard assembled is consid-
ered a fi xed guard and is fastened with special screws. TECNOPLUS s.r.l. reminds you that it is abso-
lutely forbidden to replace the screws used for the design and manufacture the appliances with screws
that feature different characteristics.
TECNOPLUS s.r.l. will immediately suspend the product guarantee in case of machine tampering car-
ried out by the Customer.
5.7 Identifi cation plate
The CE identifi cation plate is assembled on the side of the connection to the piping network. This should
not be removed or damaged.
5 - Transforming DX version (outlet pipes fi tted on the right) into SX version
(outlet pipes fi tted on the left)
The TECNO Line vacuum cleaners are generally supplied with suction and exhaust pipes on the right
side (RIGHT version). Upon request, the system can be transformed so to have the pipe connection on
the left side (LEFT version).
To do this:
Unscrew the screws and remove
the rear fi xing plate.
6
Type of Central vacuum cleaner
....................................
.........................................................................
Model:
P/N: S/N:
Technical data of the electric motor
1
Manufacturer Identifi cation
IP20
Serial Number
Product number
04/06/2019 Rev:1.0.0
CE conformity
marking