Installation Of Accessories; Functions - Tristar SR-5240 Mode D'emploi

INSTALLATION OF ACCESSORIES

Install the long spray nozzle (12) or extended connecting spray nozzle (13)
Hold the pipe section of the long spray nozzle in your hand, align the
arrow with the single-line mark on short spray nozzle (2) on the machine
body, and insert the long spray nozzle in position. Rotate the long spray
nozzle in clockwise direction, and align the arrow on the long spray nozzle
with the double-line mark on short spray nozzle on the machine body, as
shown in figure (I). To remove the long spray nozzle, please rotate the long
spray nozzle inversely (counter clockwise) as shown in figure (II), and align
the arrow on the spray nozzle with the single-line mark on the machine
body. Then the long spray nozzle can be pulled out.
(I) (II)
For the extended connecting spray nozzle
(13) you have to use the same procedure as
shown above.
Install spray with round brush (10) or bent spray nozzle (11)
For direct installation on short spray nozzle (2), aim the spray
nozzle with round brush or bent spray nozzle at the top
of spray nozzle, as shown in figure (III), and push the spray
(III)
nozzle upwards until it is in position.
Installation of spray nozzle for door/window (14 & 15)
First install the general spray nozzle (14) on short
spray nozzle (2), as shown in figure (IV) Install
the two small hooks of the spray nozzle for door/
window (15) onto suspension lugs of the general
spray nozzle, and then trigger the big hook of
(IV)
the spray nozzle for door/window, and push the
spray nozzle for door/window up and clutch (V) it
(V)
onto the body of the general spray nozzle.

FUNCTIONS

• Disinfection and sterilization:
Install the long spray nozzle (12) on the short spray nozzle (2) and aim
the spray nozzle at the position that needs disinfection, then press
down the steam button. High-temperature steam can kill bacteria.
• Cleaning the clothes:
Install the general spray nozzle (14) on the short spray nozzle (2), and
then mount the towel sleeve (16). Aim it at the hung clothes, and
press down the steam button and move the general spray nozzle up
and down as well as to the left and to the right at the same time. Then
stains can be removed from the clothes.
• Cleaning doors and windows:
Install the general spray nozzle (14) on the short spray nozzle (2), and
then install the spray nozzle for door/window (15) on it. Aim this at
the door/window, and press down the steam button and move it up
and down as well as to the left and to the right at the same time. Then
stains can be removed from the door/window.
Steam cleaner
EN
5