Parts List; Operation Procedures - Tristar SR-5240 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
Instruction manual

PARTS LIST

1. Body
2. Short spray nozzle
3. Safety cap
4. Steam button
5. Handle
6. Power cord and plug
7. Power indicator
8. Funnel
9. Measuring cup
10. Spray nozzle with round brush
11. Bent spray nozzle
12. Long spray nozzle
13. Extended connecting spray nozzle
14. General spray nozzle
15. Spray nozzle for door/ window
16. Towel sleeve
13
11
10
4
15
14
3
4
2
12
1
7
9
8

OPERATION PROCEDURES

Unpack the product, check the accessories and documents supplied
with the product and make sure that the product and accessories are
not damaged.
Before use, please read the instruction manual carefully. The steam
cleaner is only for use in households.
First, place the steam cleaner on a flat platform, push down the safety cover
(I), unscrew the safety cap counter clockwise(II) , and then install the funnel.
PUSH DOWN
Fill the measuring cup with maximum 175 ml. of clean water and add
16
the water into the tank. Do not overfill the tank, some space must be
left in the tank. Re-install the safety cap and tighten it in position.
After plug-in it will take around 4 minutes that the steamcleaner is
ready for use. At this time lightly press the steam button and check
5
whether steam is sprayed out of the nozzle. Before using please put
175 ml. of water in the tank and spray this, for example into the sink.
(Do not aim the spray nozzle at other persons).
If there is steam sprayed out, please install suitable accessories
according to your needs after you release the button.
6
Press down the steam button again in order to carry out the operations
required by you.
TURN LEFT
(I)
(II)

Publicité

Table des Matières
loading

Table des Matières