Assembly | Disassembly 24" Wheels; Double-Function Parking Brake; Locking And Unlocking The Footrests; Height Adjustment Of The Footrests - DeVilbiss Healthcare drive ASTON Mode D'emploi

EN

Assembly | Disassembly 24" wheels

The 24" wheels are equipped with a quick-release axle
and thus easy to install. To do this, press the release but-
ton in the center of the hub and insert the wheel into the
hole provided in the frame (pic. 7).
After insertion, ensure that the wheel is correctly locked
into place. Repeat these steps for the second wheel.
Ensure that the parking brakes are working properly
(pic. 8).
7

Double-function parking brake

To apply the brake, press the lever downwards (pic. 9).
At the same time, the directional position of the wheel is
blocked.
To release the brake, press the head of the lever down-
wards (pic. 10).
9
Brake
applied

Locking and unlocking the footrests

11
12
Drive Medical GmbH & Co. KG | As per: 27.05.2020 | Errors and alterations excepted
8
Brake
released
Brake
applied
10
Brake
released
To lock the footrests, swiv-
el them to the center un-
til they audibly click into
place. To unlock them,
press the lever inwards as
shown and move the foot-
rests to the side (pic. 11).

Height adjustment of the footrests

12

Angle adjustment of the footrests

13

Cleaning | Maintenance

• Clean regularly with a moist cloth!
• Do not use any aggressive cleaning agents!
• Do not use abrasive cleaners!
• Do not use any high-dose chlorine and vinegar-based
cleaners!
• To disinfect, a spray disinfectant can be used such as
Descosept AF or Bacillol AF.
• Check the screws regularly and tighten, if necessary.
• The product should not be exposed to temperatures
above 60°C for long periods of time (for example, use
in a sauna, etc.).
• In the event of defects, contact your specialist dealer
from whom you purchased this product.
• Check the condition of the tires regularly. They are
„fail-safe", meaning that you do not have to check air
pressure or fill them with air. Always check the tires for
tears or other damage. In the event of defects, contact
your specialist dealer from whom you purchased this
product.
To adjust the height of the
footrests, first loosen the
clamping screw (pic. 12).
After shifting, the height
of the footrests can be ad-
justed. Tighten the clamp-
ing screw.
IMPORTANT:
Never use footrests to as-
sist with standing up!
To adjust the footrests at
an angle, loosen the screw
and adjust the footrest to
the desired angle. Retight-
en the screws (pic. 13).
Instructions for use Aston / Aston 24