Starting Up; Menu Structure; Examples - J.E. StorkAir WHR 90 Mode D'emploi

9. Starting up

9.1 Menu structure

The [MENU], [ ], [ ] and the [OK] keys can be used to select the following programs.
Set timer Menu
Set time delay Menu
Set ventilation Menu
Set temperature Menu
Display status Menu
Display malfunction history Menu
Reset Menu
The menus P1 and P2 are freely accessible while the menus P3 to P7
require an "access code" (352).
Accessing the menus
Order Key Display
1 Menu P1
2 P2
3 "1 - -"
4 "3 - -"
5 OK "- 2 -"
6 "- 5 -"
7 OK "- - 3"
8 "- - 2"
9 OK P3
10 P4
11 P5
12 P6
13 P7
Press [MENU] twice to exit the program. If no more keys are pressed, the program
will stop after five minutes and the display will return to the ventilation position.
The exception to this rule is menu P3. A period of thirty minutes applies here.
9.2 Example
Set the central position of the intake fan to 40%.
Order Key Display
1 Menu P1
2 P2
3 "1 - -"
4 "3 - -"
5 OK "- 2 -"
6 "- 5 -"
7 OK "- - 3."
8 "- - 2"
9 OK P3
10 OK P31
11 P35
12 OK 50
13 40
14 OK P35
15 MENU P3
16 MENU 1
9.3 Set parameters
P1 Timer: Menu not in use. P2 Time delays
No. Description
21 Switch-on delay high position 0
Low voltage input
22 Switch-off delay high position 0
Low voltage input
P1 Menu not in use
P2
P3
P4
P5
P6
P7
Description
Timer
Time delays
Access code required (352)
First numeral of access code
Second numeral of access code
Third numeral of access code
Ventilation
Temperatures
Status
Malfunction history
Reset
Description
Timer
Time delays
Access code required (352)
First numeral of access code
Second numeral of access code
Third numeral of access code
Ventilation
Ventilation procedure
Select P35
Current setting
Select 40
Saves value 40
Ventilation position
Min. Max. Default Unit
15 5 Minutes
120 30 Minutes
P3 Ventilation
No. Description
31 Exhaust fan low position
32 Exhaust fan medium position
33 Exhaust fan high position
34 Intake fan low position
35 Intake fan medium position
36 Intake fan high position
37 Current exhaust fan position
38 Current intake fan position
P4 Temperatures
No. Description
41 Comfort temperature
42 Not applicable
43 Not applicable
44 Not applicable
45 Current value of T1
(outdoor air temperature)
46 Current value of T3
(return air temperature)
47 Current value of T4
(exhaust air temperature)
48 Not in use
49 Not in use
P5 Statuses
No. Description 0
51 Standard setting at "0"
52 Standard setting at "0"
53 Standard setting at "0"
54 Bypass present No
55 Standard setting at "0"
Always leave P51, P52, P53 and P55 on "0". Setting at "1" will
cause malfunctions to be displayed.
P6 Malfunction history
No. Description Display text
61 Last malfunction Code conforms to alarm and malfunction read-
ing
62 One-but-last malfunction Code conforms to alarm and malfunction read-
ing
63 Two-but-last malfunction Code conforms to alarm and malfunction read-
ing
P7 Malfunctions
No. Description
71 Reset alarm/malfunction situation
72 Total reset: All default values are reset
In the case of total reset "P72", the "Bypass present" "P54" is set
at "0". Therefore, units with Bypass "P54" should be set back to
"1" after a total reset.
If "P54" is set at "1", return to the main menu using
[OK]-[MENU]-[MENU].
Reset is now complete. See §12 for a list of malfunctions.
34
Min. Max. Default Unit
15 98 30 %
16 99 50 %
17 100 90 %
15 98 30 %
16 99 50 %
17 100 90 %
Current value %
Current value %
Min. Max. Default Unit
15 28 18 °C
Current value °C
Current value °C
Current value °C
1 Default
Yes Dependent on model
0 1 Default
No reset Reset 0
No reset Reset 0