Table des Matières
Publicité
11
Déclaration de conformité
Declaration of Conformity
In accordance with EC Directive 94/9/EC (ATEX)
We hereby declare that the
Products:
Series:
comply with the regulations of Directive 94/9/EC (ATEX) for equipment or protection systems
intended for use in potentially explosive atmospheres.
Product group, category, zones:
II 2GD c T4 T135°C –10°C≤TA≤+60°C
The conformity assessment procedure was carried out according to Directive 94/9/EC (ATEX). The
corresponding documentation is deposited at the following notified body 0123:
TÜV Product Service GmbH
Gottlieb-Daimler-Str. 7
D-70794 Filderstadt
The following harmonized standards are applicable:
EN 983
Safety of machinery. Safety requirements for fluid power
systems and their component, pneumatics
EN 1127-1
Explosive atmospheres. Explosion prevention and protection.
Part 1: Basic concepts and methodology
EN13463-1
Non-electrical equipment for potentially explosive
atmospheres. Part 1: Basic methods and requirements
EN 13463-5
Part 5: Protection by constructional safety
ISO 8573-1
Compressed air for general use. Contaminants and purity classes
Further applicable regulations: EC Machines Directive (89/392/EWG)
The accompanying operating instructions contain important safety notes and instructions for the
commissioning of the above-named mechanical products in compliance with Directive 94/9/EC
(ATEX).
Modifications of the above-named products are not permissible, except with the express written
agreement of the manufacturer.
If the above-named products are installed in a higher-ranking machine, the new risks arising from
their installation must be assessed by the manufacturer of the new machine.
Parker Hannifin Manufacturing GmbH & Co. KG, July 2011
ppa. Johann Asperger
Parker Hannifin Manufacturing Germany GmbH & Co.KG · Sitz: Bielefeld · Amtsgericht Bielefeld HRA 15699
Persönlich haftende Gesellschafterin: Parker Hannifin GmbH · Sitz Bielefeld · Amtsgericht Bielefeld HRB35489
Geschäftsführung der Parker Hannifin GmbH: Dr. Gerd Scheffel, Günter Schrank, Christian Stein, Kees Veraart
Vorsitzender der Aufsichtsrates: Hansgeorg Greuner
Piston rod cylinder
AZ, DZ, NZK, R, SZ
ppa. Alexander Keller
Parker Hannifin Manufacturing GmbH & Co. KG
Pneumatic Division Europe – Origa
Industriestraße 8
70794 Filderstadt (Sielmingen)
Deutschland
Tel +49 (0)7158 1703-0
Fax +49 (0)7158 64870
info-origa-de@parker.com
www.parker-origa.com
www.parker.com
Ust.-Id.-Nr.: DE 277325745
Steuer-Nr. 349/5747/2105
Commerzbank AG
BLZ: 480 400 35
Konto: 7610371
IBAN: DE14 4804 0035 0761 0371 00
SWIFT: COBADEFF480
11
Dt. 1996
Dt. 1997
Dt. 2001
Dt. 2000
Gb. 2001
F
Publicité
Table des Matières
