ADE BR 1701 Mode D'emploi page 25

Note on material damage
‚ The speaker is protected from moisture, but neither it
nor the supplied cables should be immersed in water
or other liquids. Protect the device from excessive
moisture, direct sunlight and dirt.
‚ Do not connect the speaker to a speaker output of
a separate power amplifier. This would damage the
speaker.
‚ Condensation may occur inside the speaker if you
move it from a very cold place to a very warm one.
Wait a few hours before turning on the speaker.
‚ Keep magnetic stripe ID cards, credit cards, etc. away
from the device. The magnets installed in the speaker
could damage them.
‚ Never use harsh, scouring or abrasive cleaning agents
or the like to clean the speaker. Doing so may scratch
the surfaces.
‚ The speaker has feet at its bottom. Since surfaces are
made of various materials and are treated with diverse
care products, it cannot be completely ruled out that
some of these substances contain constituents that
attack and soften the feet of the device. Place a
non-slip pad under the speaker, if necessary.
Bluetooth speaker BR 1701
25