Dimensions And Weights - Sulzer XRW 750 Instructions De Montage Et D'utilisation

Table des Matières

Les langues disponibles

Installation and Operating Instructions (Translation of Original Instructions)

XRW 750

General

The main parts of the installation and operating instructions with part no. 15972513-EU (Submersible Mixer Type XRW) are also valid for

XRW 7511. This also applies if the XRW 7511 model Ex is connected correctly and operated in safe mode. The same applies for the Safety

instructions. These are included in the separate booklet 15970799 and have to be studied carefully before installation and commissioning!

These "additional" installation and operating instructions for submersible mixer type XRW 7511 contain only cross-references

e.g. the differing, additional and product specific information.

1.1 - 1.3

Introduction; Correct usage of the product; Application restrictions

See chapter 1.1 - 1.3 of the Installation and Operating Instructions 15972513-EU.

1.4

Application areas

The submersible mixer XRW 7511 is used for mixing, stirring and agitating of viscous fluids containing solids in sewage treatment plants,

industry, and agriculture. It is specifically designed for the major mixing fuctions during homogenization of sludge and coenzymes.

1.5

Identification code

See chapter 1.5 of the Installation and Operating Instructions 15972513-EU. *Propeller type = 2-blade special propeller for sludge and

coenzymes.

1.6

Technical data

See chapter 2 of the Installation and Operating Instructions 15972513-EU.

1.6.1

Technical data XRW 7511, 50 Hz

[mm]

[1/min]

XRW 7511

750

296

1.6.2

Technical data XRW 7511, 60 Hz

XRW 7511

750

296

= Power input ; P

= Power output.

● = Standard ; ○ = Option; ●* =Moisture ingress monitor in connection chamber instead of oil chamber. Cable type: 10 m cable with free ends as standard

1.7