User's Manual Facial Tanner - BBWC GB9212 Mode D'emploi

User's manual facial tanner

Please read these instructions carefully before assembling and using the sun lamp GB9212.
Make sure you only use this appliance in accordance with the recommended treatment
times, tanning intervals, and tanning distance.
Power supply
This sun lamp should only be connected to a 230V 50Hz socket. Never place the sun lamp
in a bathroom, sauna, or any other damp room.
Protective goggles
Ultraviolet radiation is harmful to the eyes. A pair of protective goggles, which must be
worn with every use, has therefore been included with this sun lamp. Never use "regular"
sunglasses instead of the protective goggles. Even shutting the eyes provides inadequate
protection. A spare pair is also included.
Operation
Start the facial tanner by opening the two side panels by pushing button A (see drawing 1).
Panels will open themselves by a built in spring. Open the panels till they cannot go any
further 1 B. DON'T FORCE SINCE THAT MAY CAUSE DAMAGE. The panels should stay in a
certain angle to give maximum side tanning on the face. Turn the facial in the right position
towards the face. The chosen position can be fixed by turning the knob on the right side of
the facial (turn to the left 1 E). Plug the mains lead into the socket and set the timer 1 C
DRAWING 1
Timer
8