Acksys AirBox V1 Série Guide D'installation Rapide page 22

You can select any radio interface to set up its parameters: WiFi, Cellular.
Set the following essential parameters:
WiFi interface
Country: after applying this parameter, channel regulation rules are
o
enforced
The operating mode: Access point, client (bridge), Mesh
o
Wi-Fi parameters: 802.11 mode, radio channel (take care about
o
legislation), SSID
Security parameters (WEP, WPA, WPA-PSK, WPA2, WPA2-PSK,
o
SSID broadcasted or not)
Cellular interface
The slot of the SIM card used at startup
o
The PIN code provided by your operator for each SIM card
o
The access point (APN) provided by your operator for cellular
o
connections.
You will find a complete description of all modes in the WaveOS user manual.
Upon delivery, the default factory settings are:
Cellular Radio interface disabled,
o
WiFi Radio interface(s) disabled, preset for access point mode,
o
SSID: "acksys" (broadcast)
o
No security (No WEP, no WPA, no WPA2, no filtered MAC)
o
802.11n mode for WiFi/WiFi1, auto channel
o
802.11ac mode for WiFi2, auto channel
o
GNSS disabled
o
-4-