System Setup Putting The System Together; Step 1: Set Up The Speaker Array - Bose LIFESTYLE 135 II Série Guide D'installation

System Setup
Putting the system together
Notes:
• The LIFESTYLE
surfaces of your room to deliver wide, spacious sound. For best sound quality,
the speaker array should not be placed inside a cabinet, or diagonally in a corner.
• Keep other wireless equipment, such as wireless computer network routers,
cordless phones, microwave ovens, or other WI-FI
away from the speaker array and Acoustimass

Step 1: Set up the speaker array

What you need:
Speaker array
A. Lay the speaker array grille-side down on the table in front of your TV.
Notes:
• To protect the surface of your table you may want to put a protective cloth
under the speaker array until setup is complete. The foam bag removed from
the speaker array could be used for this purpose.
• Be sure to remove all protective films from the speaker array before
operating the system. They may affect acoustic performance if left in place.
B. Plug the audio input cable into the connector labeled Audio In on the speaker
array. Make sure the flat surface with the arrow on the plug faces up.
8 - English
135 Series II home entertainment system uses the reflective
®
®
module.
®
Audio input
cable
Speaker array
Audio input cable
enabled audio/video devices
OPTIONAL:
Power cord
Speaker array
feet