EIBENSTOCK BST 352 V Notice Originale page 13

Technical Characteristics
Measures:
Length of the column:
Weight:
Max. drilling diameter:
Inclination:
Carriage brake:
Locking in top position:
Fixture of the motor:
Adaptation to surface:
Available special accessories:
Fastening set (concrete)
Fastening set (brickwork)
Spare dowel
Rawl – dowel
Quick action bracing unit
Water suction ring WR 352
Spare seal for water suction ring ED 352 for WR 352
Vacuum pump VP 04
Vacuum tube
Vacuum set BST 352 V
Diamond drill rig with axle, turnstile, allen key and operating instruction in a
cardboard box.
Application for Indented Purpose
The diamond drill rig BST 352 V is made for diamond core drills which are fixed by
means of a mounting plate (e.g.: EBM 352).
The max. drilling diameter must not exceed 352 mm .
When drilling overhead, a water collecting device must be used.
In case of wrong handling or misuse, the producer does not assume any
liability.
Item
Supply
525 x 320 x 1040 mm
995 mm
22,5 kg
352 mm
0° - 45°
Yes
Yes
Plate fixture by mounting plate
4 positioning screws / 2 bubble
levels
13
Order no.
35721
35724
35722
35725
35730
35873
3586L
09204
35855
3585G