Before Using Your New Hob; Sensitive Touches; Starting-Up; Residual Heat Indication - Electrum PTL320VTCTA052017 Notice D'utilisation

Before using your new hob

Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent
which risks causing blue-tinted colour on the glass surface.

Sensitive touches

Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your finger
touches the key, the corresponding command is activated. This activation is validated by a
control light, a letter or a number in the display and/or a "beep" sound.
Touch only one key on the same time.

Starting-up

•
Start-up/ switch off the hob
Action
To start
To stop
•
Start-up/ switch off a heating zone
Action
Zone selection
Increase power
Decrease power
Stop
If no action is made within 20 second the electronics returns in waiting position.

Residual heat indication

After the switch-off of the hob, the heating zone is still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zone may be touched safely.
When the residual heat indicator light is on,don't touch the heating zone and don't put any heat
sensitive object on them. There are risks of burn and fire.

Timer

The timer is able to be used simultaneous with all heating zones and this with different time
settings (from 1 to 99 minutes) for each heating zone
•
Start timer
Action
Zone selection
Increase power
To select « Timer »
Decrease the time
Increase the time
The time is confirmed and the cooking starts until the time reaches [ 00 ].
•
Stop timer
Action
Zone selection
To select « Timer »
To stop the « Timer »
Control panel
press key [ ]
press key [ ]
Control panel
press selection key
press key [ + ]
press key [ - ]
press key [ - ]
Control panel
press selection key
press key [ + ]
Press simultaneously [ - ] and [ + ]
Press key [ - ]
Press key [ + ]
Control panel
press selection key
Press simultaneously [ - ] and [ + ]
Press key [ - ]
32
Display
[ 0 ]
nothing or [ H ]
Display
[ 0 ]
[ 1 ] to [ 9 ]
[ 9 ] to [ 1 ]
[ 0 ] or [ H ]
Display
[ 0 ]
[ 1 ] to [ 9 ]
Timer [ 00 ] min
[ 00 ] wents to 30,29....
time increase
Display
[ 0 ]
The remaining time
[ 00 ] then stops