Preparations; Connect To Playback Devices; Connect To Power Sourc; Input Selection Switching - AIRPULSE A300Pro Mode D'emploi

Preparations

1. Connect to playback devices

Right speaker
RCA audio
cable
Coaxial cable
- +
Fiber optic
input audio cable
-2 +2 -1 +1
-4 +4 -2 +2
-6 +6 -3 +3
DESIGNED BY PHIL JONES
USB cable
XLR cable
RCA audio cable
CD player/audio decoder
2.Connect to power source
Right speaker
* Connect the power cables included to power input
ports on the rear panels of both speakers, and then
insert power plugs into wall outlet;
* After all cables are connected securely, press power
switches on the rear panels of both speakers to turn
- +
on main power;
-2 +2 -1 +1 * When in other inputs (AUX/Coaxial/Optical/USB/
-4 +4 -2 +2
-6 +6 -3 +3
DESIGNED BY PHIL JONES
Bluetooth), press the "
control to switch to Standby/ON state.
Please press the "
main power.
Left speaker
CD player
CD player/audio
decoder/ music
player, etc.
- +
+6
+3
0
-3
-6
+3
TV/CD player/
-2 +2 -1 +1 +1
0
-4 +4 -2 +2 -1
-3
-6 +6 -3 +3
Blu-ray player,
DESIGNED BY PHIL JONES
etc.
PC or Mac
RCA audio cable
XLR cable
CD player
Left speaker
- +
-2 +2 -1
-4 +4 -2
-6 +6 -3 +3
DESIGNED BY PHIL JONES
" button on the remote
" power switches to turn off
11
Preparations

3. Input selection switching

- +
-2 +2 -1 +1
-4 +4 -2 +2
-6 +6 -3 +3
DESIGNED BY PHIL JONES

4. The left and right speakers pairing

Right speaker
- +
-2 +2 -1 +1
-4 +4 -2 +2
-6 +6 -3 +3
DESIGNED BY PHIL JONES
1. Power on both speakers, first press the "PAIR" button on the rear panel of the right
speaker, the pairing indicator will flash rapidly;
2. Then press and hold the "PAIR" button on the rear panel of the left speaker, the pairing
indicator will flash rapidly;
3. Wait until the red indicators on both speakers are lit constantly. Then the pairing is
complete and wireless connection is made.
Note: If the red indicators on both speakers are lit in a breathing pattern, it indicates that
there is no connection or the connection is unsuccessful, please repeat the above steps.

5. Speakers placement

Left speaker
+6
+3
0
-3
-6
+1 +3
0 +1
-1
+2 -3
* For the balanced input, slide the "INPUT
输入选择
INPUT SELECT
SELECT" switches to the "BALANCED"
平衡输入
BALANCED
positions on both speakers.
非平衡输入
UNBALANCED
其它输入
OTHERS * For the unbalanced input, slide the "INPUT
SELECT" switches to the "UNBALANCED"
- +
+6
+3
0
-3
-6 positions on both speakers.
-2 +2 -1 +1 +3
+1 0
-1
-4 +4 -2 +2 -3
-6 +6 -3 +3 * For other inputs (AUX/Coaxial/Optical/USB/
DESIGNED BY PHIL JONES
Bluetooth), slide the "INPUT SELECT" switches
to the "OTHERS" positions on both speakers,
and use the remote control or press the
"VOLUME" dial on the right speaker to select
the desired audio source.
PAIR
The left and right speakers have been paired before leaving
the factory. It should be in the wireless connection mode
when both speakers are powered on and the red indicators
on both speakers are lit constantly. Please follow the steps
below to re-pair if needed.
* Place both speakers on a solid, leveled and steady
surface.
Right speaker
For the optimum sound positioning and layering, using
the specialstands of A300Pro is recommended.
* For the optimum stereo sound effect, the listener
can slightly adjust speaker angel.
* For the most accurate sound and balance, the listener
should be in the axis of equilateral triangle formed
by the left and right speakers.
* High frequency has a much higher directivity, and
for more accurate sound effect the speaker's tweeter
should be at ear level of the listener.
12
Left speaker
PAIR
- +
+6
+3
0
-3
-6
+3
-2 +2 -1 +1 +1
0
-4 +4 -2 +2 -1
-3
-6 +6 -3 +3
DESIGNED BY PHIL JONES