Safety Instructions; Main Components; Specified Conditions Of Use - ADAMAS 792800B20 Manuel D'utilisation

SAFETY INSTRUCTIONS

Read all safety warnings and instructions
that were provided with the drill stand or
the drill. Failure to follow the safety warn-
ings and the instructions may result in
Save all safety warnings and instructions for future
reference.
of water hoses. Pay attention to the cooling water
during drilling overhead. Remove cooling water in a
Watch what you are doing. Use common sense. Do
not operate machinery when you are tired or not con-
centrated. Make sure that you can always stop the
motor (emergency stop). Do not use the machinery
of which the ON/OFF switch does not work properly.
Do not wear loose clothing or jewellery. They can
be caught in moving parts. When working in open
air rubber gloves and non-skid footwear are recom-
mended. Wear protective hair covering to contain
long hair.
tection against sharp items and a safety goggle for
protection against sparks/small concrete particles.
Use a dust mask covering mouth and nose if nec-
essary. Ear protectors are recommended for sound
levels over 80 dB(A). For sound levels over 90 dB(A)
ear protectors are compulsory.
Disconnect the plug from the power source before
making any adjustments or changing accessories.
Starting drills accidentally is the cause of some ac-
cidents.
Do not overload the drill rig and do not use it as a lad-
rig can raise the drill rig's centre of gravity and cause
it to tip over.
Keep machinery tools sharp and clean for better and
safer performance. Follow maintenance instructions.
Keep handles dry and free from oil and grease.
Check for alignment and binding of moving parts.
Breakage of parts and any other conditions that may
parts that are damaged should be properly repaired
or replaced by an authorised service centre.
The use of accessory and attachment other than
recommended in this manual or the catalogue may
present a risk of physical injury.
Have your drill stand serviced/repaired only by a
parts. This will ensure that the safety of the device
is maintained.
Cluttered areas invite injuries. Do not let uninvited
persons or animals contact machinery or enter the
work area. Make provisions to catch loose concrete
Keep work area clean. Pay attention to all cables
26
N H N
can result in serious personal injury or the death of the
operator or others.

MAIN COMPONENTS

The numbering of the illustrated product features refers to
the representation of the drill stand on page 5.
1. Water collection ring
2. Handles
3. Extraction hose
-
4. Lever
5. Carriage
6. Motor bracket
7. Quick-clamping column
8. Combination ratchet spanner
9. Tensioner
10. Column
11. Trasport wheels
12. Base
13. Quick connect adapter
14. 360° Bracket
15. Anchor plate

SPECIFIED CONDITIONS OF USE

The core drill rig is one out of a series of lightweight machi-
nes meant for drilling with diamond core drilling bits. The
stone-like materials. The function of the drill rig is to po-
sition and guide the drill motor during the drilling process.
Do not use this product in any other way as stated for nor-
mal use.
N N
work area. Do not use electric power tools in the pre-
conditions.
Mount accessories and tools in the right way to pre-
vent them from coming loose. Check if all keys and
adjusting wrenches are removed from the machinery
before turning it on. Keep proper footing and balance
at all times.
WARNING! Under no circumstances may
hout the permission of the manufacturer.
Always use genuine accessories. Non-aut-
-
NMH0201
01-11-2020