THOMSON THFP248GM Mode D'emploi page 30

Robot patissier multifonction
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

~ Stainless steel mixing bowl
1. Keep the appliance in a safe, stable, clean and dry place.
2. One hand hold on the head of the machine, another hand presses the
release button, the appliance will automatically lift the head, and we
can make the appliance head to the maximum position by hand and
install bowl cover.
3. Installing the dough hook to the specified position according to above
installing method.
4. Place the stainless-steel bowl in the specified position and lock it
clockwise.
5. Do not exceed the bowl's maximum capacity so as not to overload the
appliance.
6. Ready and press down the appliance head to lock (the release button
will pop up) to recover the head position.
7. Switch on the 220V-240V 50-60Hz safety power.
8. Use the speed control button of the mixer to help you find the correct
speed to use.
9. When the mixture reaches the desired range of agitation, turn the speed
knob to the "OFF" and unplug the power plug.
10. Turn the stainless-steel bowl counterclockwise and remove it from the
machine.
11. Take out the mixture from bowl.
12. The cleaning of parts can be carried out in the light of the methods
described in "cleaning and maintenance".
P.S.:Before using this product, please clean the accessories with detergent,
rinse it with water and leave it dry and ready.
~ Dough Hook
Use of the dough hook for mixing bread, dough, pasta and other consistent
foodstuffs.
1. Install the kneading hook and stainless-steel bowl according to the steps
described above. Add the dry yeast and liquid elements after adding the
flour to be incorporated.
2. After the complete installation, turn the speed variator to speed 1 and
wait for the flour to be kneaded. Turn the switch to speed 2 until the
dough has good elasticity or the necessary gluten.
EN-9

Publicité

Table des Matières
loading

Table des Matières