Seecode 236491 Instructions De Fonctionnement page 7

Safety instructions
Pay attention to your safety!
Always insert the nose hair trimmer carefully into the nose and ears.
Ensure that the battery is sufficiently charged. If the power is low,
the shaving head may run more slowly and the hairs may be pulled
instead of cut.
Keep this product out of the reach of children.
Operating the nose hair trimmer
Check the battery charge level before use and then remove the pro-
tective cap from the shaving head. Switch the device on by pressing
the on/off switch and insert the shaving head into the nose or ear.
Slight movements of the appliance support the cutting effect.
Battery & charging
Please charge the battery fully using the USB cable and a suitable
power adapter (mains adapter not included).
Note: Do not use power adapters with an output voltage of more
than 5 volts to charge the battery! If the voltage is too high, this can
damage the charging cable and cause a fire hazard.
The 4 blue LED indicator lights always show you the current battery
charge and power level in 25% increments.
If the device is not used for a longer period of time, store it in a dry
and cool environment and charge it every 3 months when not in use
to avoid deep discharge of the battery.
Care and maintenance
To clean the shaving head, pull off the shaving head housing with a
twisting motion and remove the blade. You can use a small, soft brush
to clean the blade.
You can also rinse the shaving head under running water. Allow it to
dry sufficiently before reassembling.
From time to time, you can moisten the inside of the shaving head
with a drop of machine oil.
Clean the outside of the appliance with a soft, slightly damp cloth if
necessary. To avoid damage, do not hold or immerse it under water.