Product Use; Reciclying And Disposing; Guarantee - Greencut TOOLS881 Manuel D'utilisation

24
CHARGER
• Before using the battery charger, read all instructions and warning marks.
• Do not replace with any other charger.
• Do not use the charger if it has been damaged or if it has remained in humid environments.
• When the battery needs to be charged, a charge of 3 to 5 hours, allows the tool to operate at full power. A
charge indicator light will light up to show that charging is taking place.

PRODUCT USE

OPERATING THE WIRELESS SCREWDRIVER
Choose the screwdriver tip that best suits the screw you want to adjust. Place the tip inside the mandrel of the
screwdriver and make sure it is completely inside. Insert the tip of the screwdriver into the screw and operate the
reversible trigger. The cordless screwdriver uses a single speed for all operations and is does not vary the speed.
To adjust the screw, press the lower part of the trigger so that the tip of the screwdriver rotates forward (to the right).
To loosen the screw, press the top of the trigger so that the tip of the screwdriver rotates in reverse (to the left).

RECICLYING AND DISPOSING

Worn products are potentially recyclable and should not be disposed of in the usual trash. Help us protect the
environment and preserve natural resources.
Dispose of the product in an environmentally friendly way. Do not throw it away with the household rubbish. Its plastic
and metal components can be separated and recycled. Take this device to an approved recycling centre (green point).
The materials used in the packaging of the machine are recyclable: please throw them in the appropriate container.
ATTENTION: Take the battery to a local recycling and / or disposal centre that is certified for
disposal. If the battery breaks or cracks, whether it drips or not, do not recharge it and do not use
it. Get rid of it and replace it with a new one. DO NOT ATTEMPT TO REPAIR IT!

GUARANTEE

GREENCUT guarantees all products for a period of 2 years (valid for Europe). This guarantee is subject to the purchasing
date and taking into consideration the purpose of use of the product. In order to claim your guarantee, you must
present your receipt of purchase and its description, as well as the defective tool.
The guarantee does not cover wear and tear due to normal use, or due to non-compliance with the operating and
maintenance instructions, especially for batteries.
In the event that repairs or modifications have been made by the consumer or any other than with the original
GREENCUT spare parts, the guarantee will be voided.
In the event of a justified guarantee claim, we are authorised, at our discretion, to repair or replace the defective tool
free of charge. Claims beyond those described in this guarantee will be invalid.