HAMPTON BAY 71134 Guide D'utilisation Et D'entretien
Les langues disponibles
Les langues disponibles
Liens rapides
PACKAGE CONTENTS
A
PLANNING FOR A SUCCESSFUL ASSEMBLY
Read all instructions before assembly and installation.
Inspect each part for defects that may have occurred during shipping.
Keep your receipt and these instructions for proof of purchase.
CHOOSING THE RIGHT LOCATION
Install your solar light in a location with full, direct sunlight. Do not install
in shaded areas as these areas will not allow the batteries to fully charge
and will reduce the nighttime operating hours for your light. Ensure that
the installation location is away from other nighttime light sources such
as street or porch lamps. These light sources may prevent your solar light
from automatically turning on.
HOW SOLAR WORKS
The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable batteries.
At night, the solar light is powered by the batteries using the electricity stored during the day. The operating time depends on geographical location,
daily weather conditions, and season. For optimal performance during the evening, allow the batteries to charge for 6 to 7 hours in direct sunlight.
Assembly and Installation
1
Installing the solar spot light in the ground
NOTE: Do not use a hammer. If the ground is hard, use water to
soften or a trowel to loosen the soil.
□
Remove the pull tab from the solar panel (first time users only).
□
Firmly slide the spot light head (A) into the stake (C).
Use and Care Guide
Solar Spot Light
B
C
A
C
Part
A
B
400mAh 14430 3.2V LiFePO4
rechargeable battery (pre-installed)
C
□
Push the assembly into the ground.
1
Please contact 1-855-HD-HAMPTON for further assistance.
Item #1001 027 173
Model #71134
Description
Spotlight head
Stake
Quantity
2
2
2
HOMEDEPOT.CA
Manuels Connexes pour HAMPTON BAY 71134
Sommaire des Matières pour HAMPTON BAY 71134
- Page 1 Use and Care Guide Solar Spot Light Item #1001 027 173 Model #71134 PACKAGE CONTENTS PLANNING FOR A SUCCESSFUL ASSEMBLY Part Description Quantity Read all instructions before assembly and installation. Spotlight head Inspect each part for defects that may have occurred during shipping.
- Page 2 Maintenance Replacing the battery CAUTION: When replacing the battery, use one (1) 400mAh LiFePO4, 14430, 3.2V rechargeable battery. IMPORTANT: Dispose of the batteries in accordance with local, state, and federal regulations. □ Open the battery cover. □ Replace the old battery with a fresh 400mAh LiFePO4, 14430, 3.2V rechargeable battery.
- Page 3 Guide d’utilisation et d’entretien Projecteur solaire Article nº 1001 027 173 Modèle nº 71134 CONTENU DE L’EMBALLAGE PRÉPARATION POUR UN ASSEMBLAGE RÉUSSI Pièce Description Quantité Lisez toutes les instructions avant de procéder à l’assemblage et l’installation. Tête de projecteur Inspectez chaque pièce à la recherche de dommages qui auraient pu se Pile rechargeable LiFePO4, 3,2 V, produire pendant le transport.
- Page 4 Entretien Remplacement des piles ATTENTION: Lorsque vous remplacez le pile, utilisez un (1) pile rechargeable LiFePO4, 3,2 V, modèle 14430, 400 mAh. IMPORTANT: Jetez les piles conformément aux réglementations locales, provinciales et fédérales. □ Ouvrez le couvercle du compartiment à piles. □...