Control Panel; Temperature Adjustment - Haier WS137GDAI Manuel D'utilisation

EN
Screen
Lock/Unlock
Temperature Zone
1.
Automatic Locking and Unlocking
The appliance has an automatic locking function in order to prevent improper operation of the set operating
conditions and temperature due to accidental triggering.
The "Lock" icon will be displayed and control panel will be locked if operation is stopped for 30 seconds.
3s
Unlocked
In order to unlock the panel, press the key and hold it for 3 seconds. The control panel will be unlocked.
Other keys can be operated when the panel is unlocked.
3s
Locked
2.

Temperature Adjustment

Press "TEMP Zone Selection" briefly in order to select the required temperature zone. If the
selected temperature zone turns on, "TEMP Display Zone" displays the temperature of the current
temperature zone.
After completion of temperature zone selection, press the "TEMP Up/Down" keys briefly in order
to enable temperature settings. At this time, the figures on "TEMP Display Zone" flash and can be set
by pressing the "TEMP Up/Down" keys. The temperature rises by 1°C each time when the Up key
is pressed and falls by 1°C each time when the Down key is pressed. Temperature settings range
is between 5~20°C. After the temperature is selected, operation will be suspended for 3 seconds,
and then the currently set parameter will become the system default. The process of temperature
adjustments in other temperature zones is the same as that given above.
Temperature
Press briefly
to select
a temperature zone

Control Panel

Temperature Tem-
perature
Up/Down
Conversion
Stop key
operation
for 30s Locked
Press the
3s
Lock key and
hold for 3s
Unlocked
Press
once, rise
by 1 °C
Interior Light
°F/°C Humidity
3s
Press
This will not flash
once,
after the operation has
decrease
stopped for 3 seconds
by 1 °C
Use
Power
Cycle of
the air
19