TEC Y2-3 Mode D'emploi page 15

MNS00054.00
TEC
Instruction Manual
With the keys
Move the cursor with the keys
of cycleo (e.g.: Complete) and press
Inside the Customized Cycle option configure the cycle by temperature or by
time, using the keys
In PHASE 1, determine with the aid of the keys
temperatures and the duration. Press
move to the next phase.
Repeat the procedure of the PHASE 1 to customize the PHASE 2 and the PHASE 3
according with the required specifications.
N.ºMNS00054.00
select Customized Cycle and press
and select the desired type
.
. Press .
at the end of each option and then
.
, the
15/50