Télécharger Imprimer la page
Les langues disponibles
  • FR

Les langues disponibles

Liens rapides

Page Contents
2
Safety Information
4
Informazioni di sicurezza
6
Consignes de sécurité
8
Informationen zur Sicherheit
10
Informaciones de suguridad
12
Unpacking and preparation
13
Installation and start-up
14
Control panel
16
Menu setting
24
Maintenance
32
Technical information
32
Cause and solution of problems
33
Channel functions
Downloaded from
www.Manualslib.com
ALPHA PROFILE 700
ALPHA PROFILE 700
INSTRUCTION MANUAL
INDEX
EN
IT
FR
DE
ES
manuals search engine
Congratulations on choosing a Clay Paky product!
We thank you for your custom.
Please note that this product, as all the others in the rich Clay
Paky range, has been designed and made with total quality to
ensure excellent performance and best meet your expectations
and requirements.
Carefully read this instruction manual in its entirety and keep it
safe for future reference. It is essential to know the information
and comply with the instructions given in this manual to ensure
the fitting is installed, used and serviced correctly and safely.
CLAY PAKY S.p.A. disclaims all liability for damage to the fitting
or to other property or persons deriving from installation, use and
maintenance that have not been carried out in conformity with this
instruction manual, which must always accompany the fitting.
CLAY PAKY S.p.A. reserves the right to modify the
characteristics stated in this instruction manual at any time and
without prior notice.
1
1
C61365
ST
"
"
C61366
loading

Sommaire des Matières pour Clay Paky ALPHA PROFILE 700

  • Page 1 Installation and start-up the fitting is installed, used and serviced correctly and safely. CLAY PAKY S.p.A. disclaims all liability for damage to the fitting Control panel or to other property or persons deriving from installation, use and...
  • Page 2 According to The fixture must be positioned so that the minimum distance between the front lens and human eye is at least 1 EN 62471 metre to prevent personal photobiological risks. ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com...
  • Page 3 • 2006/95/EC - Safety of electrical equipment supplied at low voltage (LVD) • 2004/108/EC - Electromagnetic Compatibility (EMC) • 2011/65/EU - Restriction of the use of certain hazardous substances (RoHS) • 2009/125/EC - EcoDesign requirements for Energy-related Products (ErP) ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com...
  • Page 4 Secondo la norma Il proiettore deve essere posizionato in modo tale che la minima distanza della lente del proiettore dall’occhio umano EN 62471 sia di almeno 1 metro per prevenire rischi fotobiologici alla persona. ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com...
  • Page 5 • 2006/95/CE - Sicurezza delle apparecchiature alimentate in Bassa Tensione (LVD) • 2004/108/CE - Compatibilità Elettromagnetica (EMC) • 2011/65/UE - Restrizione d’uso di determinate sostanze pericolose (RoHS) • 2009/125/CE - Specifiche per la progettazione ecocompatibile dei prodotti connessi all’energia (ErP) ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com...
  • Page 6 à l’œil humain de la lentille du projecteur soit de 1 mètre minimum Selon la norme pour prévenir des dangers photo-biologiques à la personne. EN 62471 ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com...
  • Page 7 • 2006/95/EC - Safety of electrical equipment supplied at low voltage (LVD) • 2004/108/EC - Electromagnetic Compatibility (EMC) • 2011/65/EU - Restriction of the use of certain hazardous substances (RoHS) • 2009/125/EC - EcoDesign requirements for Energy-related Products (ErP) ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com...
  • Page 8 Nicht die Lampe fixieren, wenn sie in Betrieb ist. Kann für die Augen gefährlich sein. Der Projektor muss so Gefahrenklasse 2 positioniert werden, dass der Mindestabstand der Projektorlinse vom menschlichen Auge mindestens 1 Meter Gemäß Norm EN 62471 beträgt, um einer fotobiologischen Gefährdung der Person vorzubeugen. ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com manuals search engine...
  • Page 9 • 2006/95/EC - Safety of electrical equipment supplied at low voltage (LVD) • 2004/108/EC - Electromagnetic Compatibility (EMC) • 2011/65/EU - Restriction of the use of certain hazardous substances (RoHS) • 2009/125/EC - EcoDesign requirements for Energy-related Products (ErP) ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com...
  • Page 10 1 metro para prevenir peligrosidad 2 riesgos fotobiológicos a la persona. Según la norma El producto es concebido para ser utilizado en los siguientes ambientes: EN 62471 ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com manuals search engine...
  • Page 11 • 2006/95/EC - Safety of electrical equipment supplied at low voltage (LVD) • 2004/108/EC - Electromagnetic Compatibility (EMC) • 2011/65/EU - Restriction of the use of certain hazardous substances (RoHS) • 2009/125/EC - EcoDesign requirements for Energy-related Products (ErP) ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com...
  • Page 12 Packing contents - Fig. 1 UNLOCKED LOCKED LOCKED UNLOCKED PAN Mechanism Lock and Release (every 90°) - Fig. 2 TILT Mechanism Lock and Release (every 45°) - Fig. 3 ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com manuals search engine...
  • Page 13 WARNING: with the exception of when the projector is positioned on the floor, the safety cable must be fitted. (Cod. 105041/003 available on request). This must be securely fixed to the support structure of the projector and then connected to the fixing point at the centre of the base. Connecting and disconnecting power cable - Fig. 5 ALPHA PROFILE 700 & “ ”...
  • Page 14 During menu setting status, after a wait time (about 30 seconds) without any key having been pressed, the display automatically returns to rest status. It should be noted than when this condition occurs, any possible value that has been modified but not yet confirmed with the key will be cancelled. ALPHA PROFILE 700 & “ ”...
  • Page 15 Once the required operations have been carried out, the display will switch off again after a wait time of 30 seconds. ➔ Continue ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com...
  • Page 16 Pan / Tilt Advanced 1234 4-700W Display Auto fan speed Colour Upload Default Firmware Setting Preset Beam User Preset 1 Setup Model Gobo User Preset 2 Calibration User Preset 3 ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com manuals search engine...
  • Page 17 Allows you to set the IP address manually by the user default. Custom IP Custom IP mask mask Allows you to set manually the Subnet Mask by the user default. ➔ Continue ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com manuals search engine...
  • Page 18 DMX input signal. 1) Press , the current setting appears on the display. 2) Use the UP and DOWN keys to select one of the following settings: 12.5% ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com manuals search engine...
  • Page 19 Complete Zoom Range: The “Autofocus” also works in overrun 3) Press to confirm the selection or LEFT to keep the current set- ➔ Continue ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com manuals search engine...
  • Page 20 Full fan speed 400W Low fan speed 4-700W Auto fan speed Display Default Reset To Setting Preset Dafault Go Back User Load Preset 1 Preset 1 Save To Preset 1 ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com manuals search engine...
  • Page 21 (Are you sure ?) appears on the display. 3) Select YES to reset partial counter or NO to keep the current setting and return to the top menu level ➔ Continue ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com...
  • Page 22 (On) or off (Off) 3) Press to confirm the selection or LEFT to keep current settings and return to the top level. ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com manuals search engine...
  • Page 23 – a confirmation message appears on the display (Reset calibration to factory default ?). 2) Select YES to reset calibration to factory default or NO to keep the current setting and return to the top menu level. ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com...
  • Page 24 Locking and releasing Pan and Tilt movements - Refer to the instructions in the UNPACKING AND PREPARATION section. Opening the head covers - Fig. 10 Closing the head covers - Fig. 11 ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com...
  • Page 25 10 minutes OFF) will reduce the lamp life. Upper Side Lower Side Lamp regulation - Fig. 14 To centre the lamp, turn the three adjusting screws as shown in the figure. ➔ Continue ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com manuals search engine...
  • Page 26 085531/001 Replacing rotating gobos (ø 25.7 mm - max 19 mm image – thickness 1.1 mm) - Fig. 16 IMPORTANT: Please contact CLAY PAKY before using customized gobos. IMPORTANT: Use only glass gobos on the rotating gobos wheel. ALPHA PROFILE 700 &...
  • Page 27 • General cleaning of internal parts. • Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Clay Paky. • General visual check of the internal components, cabling, mechanical parts, etc.
  • Page 28 Upper Side Lower Side Extraction of the effect modules: Preliminary operations - Fig. 19 Upper Side Upper Side ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com manuals search engine...
  • Page 29 IMPORTANT: Grasp the modules using the support structure and not the details which could get damaged. Insertion of the effect modules: Repeat the operations indicated in Fig. 20, 21 and 22 in reverse order. ➔ Continue ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com...
  • Page 30 This product contains a rechargeable lead-acid or lithium iron tetraphosphate battery. To preserve the environment, please dispose the battery at the end of its life according to the regulation in force. LiFePO4 ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com...
  • Page 31 OPTIONAL ACCESSORIES C61188 - HEAVY FROST FILTER KIT ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com manuals search engine...
  • Page 32 Check addresses (see instructions). Fault in the electronic circuits. Call an authorised technician. Lenses or reflector broken Call an authorised technician. Dust or grease deposited. Clean (see instructions). ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com manuals search engine...
  • Page 33 NB: To prevent accidental breakage of the effects, which could collide with each other during transport, ALPHA PROFILE 700 & “ST” before switching the projector OFF check that all the projector Channels have been excluded (DMX level = 0 bit).
  • Page 34 Random Macro Color LIGHT GREEN + LAVENDER LIGHT GREEN (only for Macro effects) GREEN + LIGHT GREEN GREEN Unused Range CTO + GREEN RED + CTO WHITE + RED WHITE ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com manuals search engine...
  • Page 35 FAST PULSATION, FAST CLOSING SLOW PULSATION, FAST CLOSING FAST PULSATION, FAST OPENING SLOW PULSATION, FAST OPENING FAST PULSATION SLOW PULSATION MAXIMUM APERTURE 128 - 131 MINIMUM APERTURE ➔ Continue ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com manuals search engine...
  • Page 36 BLADE OUT BLADE OUT • BLADE UP 2 - channel: 17 • BLADE RG 2 - channel: 21 EFFECT EFFECT BLADE IN BLADE IN BLADE OUT BLADE OUT ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com manuals search engine...
  • Page 37 100 METRES 2 - Rotating Gobo 3 - Iris 10 METRES 9 METRES 8 METRES 7 METRES 6 METRES 5 METRES 4 METRES 3 METRES AUTOFOCUS OFF ➔ Continue ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com manuals search engine...
  • Page 38 MACRO 2 16-27 MACRO 1 12-15 STAND BY BLACK 8-11 STAND BY MACRO OFF Operation with option InvertPan (Tilt conventionally represented at 35 bit and option Invert Tilt Off) ALPHA PROFILE 700 & “ ” Downloaded from www.Manualslib.com manuals search engine...
  • Page 39 (Pan conventionally represented at 0 bit and option Invert Pan Off) • LAMP CONTROL (only with option LAMP DMX On) - channel: 37 IMPORTANT: Alpha Profile 700 is not provided with hot restrike igniter EFFECT LAMP ON (FULL POWER) Lamp ignition after 5 s in full power levels.
  • Page 40 TIME TABLE Seconds Seconds Seconds Seconds Seconds Seconds Full 10.2 10.4 10.6 Follow cue Data CLAY PAKY - Via Pastrengo, 3/b - 24068 Seriate (BG) Italy - Tel. +39-035-654311 - Fax +39-035-301876 - www.claypaky.it S.p.A. Downloaded from www.Manualslib.com manuals search engine...

Ce manuel est également adapté pour:

Alpha profile 700 "st"