Publicité
EN
Operating instructions
Charging
Connect to a powered USB port using the USB cable.
LED indicator: RED= charging.
OFF = 100% charged (Approx 3 hours).
Bluetooth Audio
When powered on, the BlueSYNC BBR will auto-
pair to the last paired device. If no re-pair for 3
seconds, it will automatically enter pairing mode
and the LED indicator will flash. Pair your device.
Use PIN "0000" if prompted.
Volume
Turn the knob to power the speaker ON/OFF and
control volume. When the battery is low, you will
hear a "busy" tone.
AUX Audio
Plug the 3.5mm cable into the 3.5mm AUX port
to switch to AUX mode automatically. Remove the
3.5mm cable to switch back to Bluetooth.
8
Publicité
