OttLite WU1FR9-FFP Guide De L'utilisateur page 13

Alarm Setting
4. Once the sound has been selected, press
select your Wake Up Your Way profile. You have 3 options to choose
from, use the < and > push buttons to make your selection:
• Option 1 - Sound and Light
• Option 2 - Sound only
• Option 3 - Light only
5. Once your Wake Up Your Way profile has been selected, press
button again to select your light cycle. You have 3 options to choose
from, use the < and > push buttons to make your selection:
• 10 minute cycle
• 20 minute cycle
• 30 minute cycle
Note: Light cycle will start at lowest light intensity and will continue to
increase gradually until it reaches full intensity at set alarm time.
Example: If alarm time is set for 7:00
selected, the light cycle will start at 6:50
6. To complete Alarm setting, either press
10 seconds of no action, the unit will exit out of alarm setting mode
with settings saved.
Note: If using Natural Daylight feature for alarm setting, you will need to
manually turn off the light by pressing
push button will not turn the light feature off.
(continued)
push button again to
, and 10 minute cycle has been
a.m.
and finish at 7:00
a.m.
push button again or after
touch button. Pressing the
push
.
a.m