Electrical Requirements; Getting Started; Battery Charging; Product Usage - Kitchenaid 5Ktcr350 Manuel Du Propriétaire

For complete details on product information, instructions and
videos, including Guarantee information, visit
www.kitchenaid.co.uk/product-tips,
www.kitchenaid.ie/product-tips, or www.KitchenAid.eu.

ELECTRICAL REQUIREMENTS

USB Adapter:
Input: 100-240 VAC, 50-60 Hz, 0.5 A
USB Output: 5 VDC, 2 A
Recommended ambient charging temperature: 5-40°C
Cordless Top Down Chopper:
Voltage: 12 VDC
External Battery (Lithium-ion): 5KRB12
Nominal Voltage: 10.8 VDC
Maximum Voltage: 12 VDC
NOTE: If the USB Adapter does not fit fully in the power source, contact a qualified electrician.
Do not modify the USB Adapter in any way.
NOTE: Do not use or store batteries or products in locations where the temperature is lower
than 10°C or higher than 40°C.
LITHIUM-ION BATTERY OPERATED PRODUCT
DISPOSAL
Always dispose the battery-operated products according to federal, state, and local
regulations. Contact a recycling agency in your area for recycling locations.

GETTING STARTED

BEFORE FIRST USE
1.
Charge the Battery until it is fully charged.
2. Clean all the parts and accessories (see "Care and Cleaning" section).
3.
Remove all packaging materials, if present.
NOTE: Some dust may be on the product. This is due to the recycled materials used in
packaging. This can be cleaned with a soft towel.

BATTERY CHARGING

USING THE USB CABLE
1.
Attach the USB Cable to the USB Adapter
Battery.
2.
Plug the USB Adapter into a power source.

PRODUCT USAGE

IMPORTANT: Make sure the Battery is fully charged before using.
1.
Lower the Multipurpose Blade in the centre of the Bowl until it rests at the bottom.
*USB Adapter is not provided with the product and not sold separately by KitchenAid.
* . Connect the other end of the USB Cable to the
5