Battery Replacement - Alpine 3DA-7987 Mode D'emploi

1
84
CD Operation
Remote Control

Battery Replacement

Applicable battery: Use one CR2025 or
equivalent.
Opening the battery case
1 Place the remote upside down on a flat,
level surface.
Looking at the back of the remote, grasp the
battery holder at the bottom of the unit
between your forefinger and thumb. Insert a
pointed object into the left side of the
elongated hole.
Slide the pointed object to the right (as
indicated by the arrow) while at the same
time pulling on the battery holder.
2 Pull the battery holder gently out with your
thumb and forefinger.
2
Replacing the battery
Put the battery in the case with the (+) indica-
tion upward as shown in the illustration.
Closing the case
Push the battery holder back into the remote
until a click is heard.
English
English