Care And Cleaning - Oceanic Oceavt40Cm2 Manuel D'utilisation
Table des Matières
USE
To start and select the fan speed, use the following buttons:
0--STOP
1--LOW SPEED
2--MIDDLE SPEED
3--HIGH SPEED
Operate this knob to control oscillation to allow air to cover a larger area, or to choose a directional flow at a
required angle.
CARE AND CLEANING
Always turn off the fan and unplug it from the power outlet before cleaning.
Clean the fan with a slightly damp cloth, then dry it. Do not immerse the motor housing in water or
any other liquid. Do not use chemical or abrasive cleaners.
Table des Matières
