Technical Information - M Confort Elite 14 Manuel De L'utilisateur

MCONFORT
Filling the water
It can be from the top opening the upper cover, filling the
water, then the water will go to the water tank. Or it can be
directly to the water tank, remove the water tank, fill the
water to the maximum level, then push the water tank back to
the air cooler completely
VII. TECHNICAL INFORMATION
Nº Problem
1
The evaporative air cooler is
not working and does not
respond when the buttons are
pressed.
16
It can be from the top opening the upper cover, filling the
water, then the water will go to the water tank. Or it can be
directly to the water tank, remove the water tank, fill the
water to the maximum level, then push the water tank back to
ELITE 14 / ELITE 24
Possible cause
Power failure or defective power
connection.
The AC fuse is damaged or the
circuit stops working to prevent
an overload of power.
Las baterías del mando a
distancia se han agotado.
The remote control or the control
panel are damaged.
ELITE 14 / ELITE 24
Possible solution
Measure the input voltage and connect
it to a designated power source
Replace the fuse or restart the unit.
Change the batteries.
Repair or replace the control panel with
another of the same model.
Filling the water
the air cooler completely
Observations
Recommended to use the
voltage meter to obtain the
correct voltage.
If the problem is still not
resolved, please contact the
technical service.