Operation Guide; Caution; Instructions For Use; Power - M Confort Elite 14 Manuel De L'utilisateur

Masquer les pouces Voir aussi pour Elite 14:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

II. OPERATION GUIDE
Avoid using the evaporative air cooler in a closed area. The unit should be used only in
well-ventilated areas.
Before turning on the unit, fill the tank with water to ensure efficient operation of the
evaporative air cooler. Avoid operating the COOL function while the water tank is empty.
REMARKS: The water level must not exceed the limit of the water level scale.
Drain the water tank and clean the tank frequently.
Fill the tank with clean water only, do not put any other liquid in the tank.
Make sure that the operating voltage is not lower than the normal voltage (220 V) or
exceeds 5% of the normal voltage. If the voltage is less than the limit, the air cooler can not
work without problems or even turn on. If the voltage is higher than the limit, it can cause
damage to the machine.
Remove the plug from the socket when the machine is not in use.
III. CAUTION
Be careful with spilled water while moving the unit.
Do not place anything on top of this air cooler or obstruct the air inlet and outlet.
Do not insert any object into the ventilation while the machine is running.
Unplug the machine before cleaning to avoid electric shock.
Stop operating this air cooler immediately if it operates abnormally, for example, if the
power cord is damaged, there is a loss of electricity and contact our service center for
further instructions. It is not recommended that the user disassemble and repair the
machine.
IV. INSTRUCTIONS FOR USE
IV.II.I. POWER.
Press the icon
its light illuminates. Press this icon again to turn it off and its light turns off.
IV.II.II. SWING
Press the icon
on the control panel or on the remote control to let the vertical front grille
swing automatically and its light illuminate. Press this icon
mode, then turn off.
IV.II.II. FAN SPEED
Press the icon
low (1), medium (2), high (3), turbo (4). 4 speed lights (1,2,3,4) indicate the current wind
speed selected. The wind speeds change according to the rotation.
on the control panel or the remote control to turn on the air cooler and
on the control panel or the remote control to adjust the wind speeds to
again to stop the oscillation
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Elite 28

Table des Matières