Temperature Adjustment - Kitchenaid Ksrx25Ftwh02 Instructions Utilisateur

CONDITION: SETTING ADJUSTMENT:
REFRIGERATOR too cold REFRIGERATOR Control
one setting lower
REFRIGERATOR too warm REFRIGERATOR Control
one setting higher
FREEZER too cold FREEZER Control
one setting lower
FREEZER too warm/too little ice FREEZER Control
one setting higher
Accelerated Ice Production
This feature assists with temporary periods of heavy ice usage by
increasing ice production over a 24-hour period.
• Press ICE touch pad to set the freezer temperature to -10°F
(-23°C). The Accelerated Ice setting will remain on for
24 hours unless manually turned off. The display will continue
to show your normal temperature set point.
Q
NOTE: If increased ice production is desired at all times, set
the Freezer Control to a colder setting. Adjusting the freezer
to a colder temperature may make some foods, such as ice
cream, harder.
Digital Controls (on some models)
Warmer FREEZER REFRIGERATOR Warmer
l+
_Y/ m
Colder Colder
To turn the refrigerator on, press and hold POWER (ON/OFF) for
2 seconds.The factory recommended set points are 0°F (-18°C)
for the freezer and 37°F (3°C) for the refrigerator.
NOTES:
• To view Celsius temperatures, press the °C SELECT pad. The
indicator will light up. To return the display setting to
Fahrenheit, press the °C SELECT pad again.
• If the freezer temperature is below zero, the negative sign
next to the freezer display will light up.
Adjusting Digital Controls
The set point range for the freezer is -5°F to 5°F (-21 °C to -15°C).
The set point range for the refrigerator is 33°F to 41 °F (1°C to
5°0).
• To adjust the set point temperatures, press the refrigerator or
freezer PLUS (+) or MINUS (-) pad until the desired
temperature is reached.
CONDITION: TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too cold REFRIGERATOR Control
1° higher
REFRIGERATOR too warm REFRIGERATOR Control
1° lower
FREEZER too cold FREEZER Control
1° higher
FREEZER too warm/too little ice FREEZER Control
1° lower
Max Cool
The Max Cool feature assists with periods of heavy ice usage, full
grocery loads, or temporarily warm room temperatures.
• Press MAX COOL pad to turn on the Max Cool feature. The
Max Cool indicator light will remain on for 24 hours unless
manually turned off.
NOTE: The temperature display will not change. After
24 hours, the refrigerator returns to the previous temperature
set points.
Accelerated Ice Production (on some models)
This feature assists with temporary periods of heavy ice use by
increasing ice production over a 24-hour period.
• Press OPTIMICE ®feature touch pad to turn on the Optimlce ®
feature. The Optimlce ®setting will remain on for 24 hours
unless manually turned off.
• If increased ice production is desired at all times, set the
Freezer Control to a colder number. Setting the freezer to a
colder temperature may make some foods, such as ice
cream, harder.
Temperature System
The Temperature System feature lets you know the compressor
or evaporator fan is running. It is normal for this indicator light to
be on.
Temperature
System
The control can be adjusted to properly chill meats or vegetables.
The air inside the pan is cooled to avoid "spot" freezing and can
be set to keep meats at the National Livestock and Meat Board
recommended storage temperatures of 28 ° to 32°F (-2 ° to 0°C).
The convertible vegetable/meat drawer control comes preset at
the lowest meat setting.
To store meat:
Set the control to one of the three MEAT settings to store meat at
its optimal storage temperature.
To store vegetables:
Set the control to VEG to store vegetables at their optimal
storage temperatures.
NOTE: If food starts to freeze, move the control to the left (less
cold). Remember to wait 24 hours between adjustments.
8