Typical Installation; Dcc Installation - Thermolec DCC-9-BOX Manuel D'installation

TYPICAL INSTALLATION

For outdoor installation, use our NEMA 3R enclosure
(DCC-9-BOX-3R).
Panel
Electrical
Meter
DCC-9
Main
Disconnect
Electrical
Meter
Main
Panel
NOTES
METER STACK
Panel of
the Unit
EV Charger
compatible with
DCC-9
all models
Meter Stack
Main Breaker
MAIN DISCONNECT
EV Charger
compatible with
all models
Sub Panel
DCC-9
EV Charger
compatible with
all models

DCC INSTALLATION

STEP 1: CHECK THE PACKAGE CONTENTS
DCC-9 with
1 x DCC-9-BOX
or 1 x DCC-9-BOX-3R
STEP 2: PREPARATIONS FOR INSTALLATION
DCC-9 with
1. Disconnect the main power
2. Select the DCC intended location.
The DCC can be mounted:
- on a ceiling
- on a wall
NOTE: The DCC controller must be mounted so that the nameplate
DCC-9 with
remains visible at all times.
SUB PANEL
Do not install the DCC:
- Outdoor, unless the DCC is ordered with our NEMA 3R enclosure.
- In a location with high level of risk.
- Nearby inflammable materials, explosives or fuels, chemical
products and vapors.
1 x Ceiling
mounting support
INSTALLATION VIDEO
To access our installation video,
visit our website www.dccelectric.com
6
1 x Installation
manual