Installation Instructions; Tools And Parts; Minimum Cutout Dimensions; Trim Kit Frame Dimensions - Kitchenaid Mk1200Xs Instructions D’installation

Tools Needed
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
■
Measuring tape
■
Pencil
■ Scissors
Parts Supplied
A
D
F G
A. Trim kit frame
B. Side duct (1)
C. Upper duct (1)
D. Bottom duct (1)
E. Template

Minimum Cutout Dimensions

A
³⁄₄
16 "
(42.55 cm)
3"
(7.6 cm)
2
Downloaded from www.Manualslib.com

INSTALLATION INSTRUCTIONS

Tools and Parts

■
Phillips screwdriver
■
5/64" drill
B
C
E
I
H
F. 1" screws (4, plus 2 extra)
G. 1/2" screws (11, plus 2 extra)
H. Anti-tip bracket (1)
I. Bottom bracket (1)
t h W t h i d i d W
B
A. Depth
B. Width
manuals search engine
OVER 27" (68.6 CM)
BUILT-IN OVEN
Depth 21" (53.34 cm) min. with flush mount receptacle;
22³⁄₄" (57.79 cm) min. without flush mount receptacle
Width 25¹⁄₂" (64.77 cm)

Trim Kit Frame Dimensions

³⁄₁₆
19 "
13"
(48.7 cm)
(33.0 cm)
*For installation over 27" (68.6 cm) built-in oven
**For installation over 30" (76.2 cm) built-in oven

Electrical Requirements

WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Observe all governing codes and ordinances.
Required:
■ A 120 Volt, 60 Hz, AC only, 15- or 20-amp electrical supply
with a fuse or circuit breaker.
OVER 30" (76.2 CM)
BUILT-IN OVEN
25¹⁄₂" (64.77 cm) min;
28¹⁄₂" (72.39 cm) max.
¹³⁄₁₆
"
(2.1 cm)