Hisense RT156D4AG1 Manuel De Fonctionnement De L'utilisateur page 29

10
Operation
Remove and install the door rack
Warning:The door rack must remove
and instal carefully by the user! If the
door rack is damaged, contact the
customer helpline or assistance.
To replace the door rack, the below
steps can be followed:
Holding the left side.
●
Pat the right side of the door rack
●
upward, until the fastener has been
broken away to the door
● Similarly, remove the other side.
NOTE: You should have a appropriate
impact force on the bottom of the rack.
Remvoe the door rack
● Install the door racks:
●
Place the door rack flat on the door.
Push two sides of the door rack down
to the right place at the same time,
make sure the fastener has been
fastened to the door.
Warning:You should position the door
rack to door and snap into place, or
Install the door rack
.