Create Barber Studio Manuel D'utilisation page 9

• Add oil to the cutting head before using the razor. The body of
the product may be a little hot when using or charging it. But it
will not affect its performance.
• Do not use petrol, alcohol or solvent to clean the product.
Otherwise, the colour of the product may change.
• Use diluted soapy water to clean the product.
• Do not charge the product if the ambient temperature is above
40ºC or below 0ºC.
• Keep out of the reach of children to avoid cuts from the blade
or swallowing small parts.
INSTALLATION AND REMOVAL OF THE COMBS
This shaver includes two adjustable combs of 3-6 mm and 9-12 mm.
Installation of the combs:
• Align the sides of the cut piece with the grooves on the comb
side and insert it. Be sure to slide the comb all the way into
the blade head.
Removal of the comb:
• Slide one side of the comb open. To avoid damaging the combs,
pull lightly.
ADD OIL
3-6 mm
9-12 mm
E NGLI SH
9