Create Cyclone Force Manuel D'utilisation page 8

AS SE MB LY OF TH E VACUUM CLEANE R
Make sure the vacuum cleaner is not connected to the charger before you start the assembly:
1. Take the vacuum cleaner and accessories out of their packaging.
2. Attach the floor brush to the metal tube. Once assembled, connect these parts to the main
part of the vacuum cleaner. You will hear a "click" when the extended tube is assembled
correctly.
U SE OF ACCE S SORI E S
Please remove the charger before exchanging accessories. If the vacuum is charging or
has a low battery, it will not work.
1. The handheld vacuum can be used directly with the two-in-one suction nozzle and the
long flat suction nozzle.
2. This vacuum cleaner has three suction power modes.
3. Press the speed control button to change the vacuum's operating mode. The degree of
suction will automatically adjust according to the size of the particles.
BAT TE RY MOUN T
1. Align the guides on the battery with those
on the vacuum.
2. Once in place, slide the battery until you
hear a "click".
3. To remove the battery, press the button lo-
cated at the top and pull it out.
E NGL I SH
8
INSTRUCTIONS FOR USE
2