Sony SDM-X52 Mode D'emploi page 6

Rear of the LCD display
SDM-X72/X82
SDM-X52
6
qa Back cover (page 7)
Remove this cover when you connect cables or cords.
qs Audio input jack for INPUT1 (page 8)
This jack inputs audio signals when connected to the audio
output jack of a computer or other audio equipment.
qd DVI-D input connector (digital RGB) for INPUT1
(page 7)
This connector inputs digital RGB video signals that comply
with DVI Rev. 1.0.
qf HD15 input connector (analog RGB) for INPUT1
(page 7) (SDM-X72/X82 only)
This connector inputs analog RGB video signals (0.700 Vp-p,
positive) and SYNC signals.
qg Audio input jack for INPUT2 (page 8)
This jack inputs audio signals when connected to the audio
output jack of a computer or other audio equipment.
qh HD15 input connector (analog RGB) for INPUT2
(page 8)
This connector inputs analog RGB video signals (0.700 Vp-p,
positive) and SYNC signals.
qj AC IN connector (page 8)
Connect the power cord (supplied).
qk Arm cover (page 9)
Remove this cover to bundle connecting cords and cables.
ql Cable holder (page 9)
This part secures cables and cords to the monitor.